Sennheiser Condenser Microphones

Wireless Microphones

1800 Series
Camera-mount UHF Wireless Systems

With UHF reception (996 frequencies user-selectable in 25 kHz steps), Audio-Technica’s new 1800 Series camera-mount wireless microphone systems provide extremely flexible, professional, and easy-to-use portable wireless solutions. The 1800 Series is available in dual-channel and single-channel systems.

For simultaneous operation of two microphones, dual-channel 1800 wireless systems include the ATW-R1820 dual receiver with two completely independent receiver channels in a single unit. Dual balanced outputs enable signals to be mixed, or independently assigned to each output. Independent audio level controls provide flexible audio mixing and monitoring possibilities.

For those using a single microphone, the single-channel 1800 Series systems include the ATW-R1810 single-channel receiver.

1800 Series wireless systems come equipped with a choice of plug-on and body-pack transmitters. The ATW-T1801 UniPak® body-pack transmitters feature a professional locking 4-pin connector compatible with all Audio-Technica Wireless Essentials® microphones. The ATW-T1802 plug-on transmitters feature a locking XLR connector for adapting dynamic and condenser microphones. Both transmitters offer selectable high and low transmission modes to conserve battery life/maximize power.

Additional 1800 Series features include automatic frequency scanning, Tone Lock™ squelch, back-lit LCD, soft-touch buttons, headphone monitor output with independent level control, and durable metal construction.

Two completely independent receiver channels in a single unit, for simultaneous operation of two microphones (dual-channel systems)
Compact receiver is easy to mount on a camera
UHF reception with 996 frequencies selectable in 25 kHz steps
Automatic frequency scanning for easy selection of open channels
Tone Lock™ squelch system eliminates interference when transmitter is off
Two independent balanced outputs (dual-channel systems)
Headphone monitor output with independent level control
Battery fuel-level indicators on transmitters and receiver
Soft-touch controls for easy frequency selection
True Diversity operation for resistance to multi-path interference and dropouts
LCD frequency and battery status display with backlight
Antenna and AF Peak LED indicators
Dual-channel receiver can operate in single-receiver mode to extend battery life when only one audio channel is in use (dual-channel systems)
Transmitters operate in low or high transmission modes to conserve battery life/maximize power
Easy, user-friendly operation
Clear, natural sound quality
Powered by AA batteries
System components of the 1800 Series and 3000 Series Wireless Systems can be used interchangeably

OVERALL SYSTEM SPECIFICATIONS

Operating Frequencies	UHF Band D: 655.500 to 680.375 MHz

Number of Channels	996 total per band (25 kHz increments)

Frequency Stability	±0.005%, Phase Lock Loop frequency control

Modulation Mode	FM

Normal Deviation	±10 kHz

Operating Range	100 m (300') typical

Operating Temperature Range	23° F (- 5° C) to 113° F (45° C)

Frequency Response	70 Hz to 15 kHz

RECEIVER SPECIFICATIONS

Receiving System	Dual independent RF sections, automatic-switching diversity

Image Rejection	>50 dB typical

Signal-to-noise Ratio	104 dB at 30 kHz deviation (A-weighted), maximum modulation 37 kHz

Total Harmonic Distortion	<1% (±10 kHz deviation at 1 kHz)

Sensitivity	25 dBµV, (S/N 60 dB at 5 kHz deviation, A-weighted)

Audio Output	Balanced: 27 mV (at 1 kHz, ±5 kHz deviation)

Output Connector	3-pin mini XLR (TA3M-type)

Monitor Headphone Output	(typical) 35 mW max., 32 ohm load (per channel)

Monitor Headphone Jack	3.5 mm TRS, signals on both Tip and Ring

External Power Requirements	12V DC nominal, 500 mA

Batteries	ATW-R1820: Six 1.5V AA alkaline (not included); ATW-R1810: Four 1.5V AA alkaline (not included)

Current Consumption	Dual-channel Operation: 600 mA typical; Single-channel Operation 350 mA typical

Battery Life	Dual-channel Operation (ATW-R1820): 6 hours typical* Single-channel Operation (ATW-R1810): 10 hours typical* * depending on battery type and use pattern

Dimensions	ATW-R1820: 85.0 mm (3.35") W x 133.0 mm (5.24") H x 36.0 mm (1.42") D ATW-R1810: 75.0 mm (2.95") W x 125.0 mm (4.92") H x 32.0 mm (1.25") D

Net Weight	ATW-R1820: 425 grams (15.0 oz) (without batteries) ATW-R1810: 300 grams (10.5 oz) (without batteries)

Accessories Included	ATW-R1820: Two flexible UHF antennas; two 18" TA3F to XLRM output cables; belt pouch ATW-R1810: Two flexible UHF antennas; 18" TA3F to XLRM output cable; belt pouch

BODY-PACK TRANSMITTER SPECIFICATIONS

RF Power Output	High: 30 mW; Low: 10 mW, nominal

Spurious Emissions	Under federal regulations

Dynamic Range	>105 dB, A-weighted

Input Connections	High impedance, low impedance, bias

Batteries	Two 1.5V AA alkaline (not included)

Current Consumption	High: 180 mA; Low: 160 mA, typical

Battery Life	Approximately 6 hours (High); 8 hours (Low), depending on battery type and use pattern

Dimensions	66.0 mm (2.60") W x 87.0 mm (3.43") H x 24.0 mm (0.94") D

Net Weight	80 grams (2.8 oz) (without batteries)

PLUG-ON TRANSMITTER SPECIFICATIONS

RF Power Output	High: 30 mW; Low: 10 mW, nominal

Spurious Emissions	Under federal regulations

Input Connector	3-pin locking XLRF-type

Batteries	Two 1.5V AA alkaline (not included)

Current Consumption	High: 180 mA; Low: 160 mA, typical

Battery Life	Approximately 6 hours (High); 8 hours (Low), depending on battery type and use pattern

Dimensions	40.0 mm (1.57") x 111.0 mm (4.37") x 40.0 mm (1.57")

Net Weight	199 grams (7.0 oz) (without batteries)

Microphone Power (ATW-T1802 Plug-on Transmitter): Provides power to condenser microphones rated to
operate on 12V phantom power or less.
**Note: The 1800 Series offers UHF wireless operating frequencies in 25 kHz steps, while the 3000 Series offers UHF wireless operating frequencies in 125 kHz steps. This means that not every frequency selectable on 1800 Series components will be selectable on the 3000 Series components. Be certain to set each Transmitter-Receiver pair to identical frequencies.

Options

ATW-R1820	Camera Mount Dual Channel Receiver	£500.00
ATW-R1810	Camera Mount Single Channel Receiver	£325.00
ATW-T1801	Body Pack Transmitter	£160.00
ATW-T1802	Plug On Transmitter	£210.00
AT898CW	Sub-Miniature Cardioid Condenser Microphone	£85.00
AT899CW	Sub-Miniature Omni-Directional Condenser Microphone	£85.00
AT889CW	Head-Worn Condenser Microphone	£130.00
ATW-1821	Dual Channel Wireless System Comprising of ATW-R1820 - 2x ATW-T1801 - 2x AT899CW	£840.00
ATW-1822	Dual Channel Wireless System Comprising of ATW-R1820 - 2x ATW-T1802	£840.00
ATW-1823	Dual Channel Wireless System Comprising of ATW-R1820 - 1x ATW-T1801 - 1x ATW-T1801 - 1x AT-899CW	£840.00
ATW-1811	Single Channel Wireless System Comprising of ATW-R1810 - 1x ATW-T1801 - 1x AT899CW	£495.00
ATW-1812	Single Channel Wireless System Comprising of ATW-R1810 - 1x ATW-T1802	£495.00

2000 Series
Frequency-agile True Diversity UHF Wireless Systems

Automatic frequency scanning finds an open channel at the touch of a button
Available in two frequency bands: 840.000 - 865.000 MHz (F Band). 795.000 - 820.000 MHz (E Band)
True Diversity operation selects the better signal from two independent receiver sections, reducing dropouts
Tone Lock™ tone squelch system fights interference
Rugged metal half-rack receiver with soft-touch controls and LCD display featuring RF and AF metering
Balanced XLR and unbalanced 1/4” output jacks enable use with a wide variety of audio gear
Includes rack-mount kit and detachable UHF antennas
Ground-lift switch helps eliminate audible hum caused by ground loops between the sound system and receiver

ATW-T220 Handheld Microphone/Transmitter features PRO 41 capsule for maximum feedback rejection and consistent sound

SYSTEM CONFIGURATIONS

	ATW-2120 ATW-R2100 receiver and ATW-T220 handheld cardioid dynamic microphone/transmitter.

	ATW-2110 ATW-R2100 receiver and ATW-T210 UniPak® body-pack transmitter. Select a Wireless Essentials® microphone or cable to complete the system.

	ATW-2110/G ATW-R2100 receiver, ATW-T210 UniPak® body-pack transmitter, AT8319 instrument cable.

	ATW-2110/P ATW-R2100 receiver, ATW-T210 UniPak® body-pack transmitter, AT829cW cardioid condenser lavalier microphone.

	ATW-2110/P1 ATW-R2100 receiver, ATW-T210 UniPak® body-pack transmitter, AT899cW subminiature cardioid condenser lavalier microphone.

	ATW-2110/P2 ATW-R2100 receiver, ATW-T210 UniPak® body-pack transmitter, AT831aW miniature cardioid condenser lavalier microphone.

	ATW-2110/P3 ATW-R2100 receiver, ATW-T210 UniPak® body-pack transmitter, MT838cW omnidirectional condenser lavalier microphone.

	ATW-2110/H ATW-R2100 receiver, ATW-T210 UniPak® body-pack transmitter, PRO 8HEcW hypercardioid dynamic headworn microphone.

	.ATW-2110/HC1 ATW-R2100 receiver, ATW-T210 UniPak® body-pack transmitter, ATM75cW cardioid condenser headworn microphone.

	.ATW-2110/HC2 ATW-R2100 receiver, ATW-T210 UniPak® body-pack transmitter, ATM73cW cardioid condenser professional headworn microphone.

OVERALL SYSTEM SPECIFICATIONS

Operating Frequencies	UHF band 840.000 - 865.000 MHz (F Band) 795.000 - 820.000 MHz (E Band)

Number of Channels	10 total

Frequency Stability	±0.005%, Phase Lock Loop frequency control

Modulation Mode	FM

Normal Deviation	±5 kHz

Operating Range	100 m typical

Operating Temperature Range	41° F (5° C) to 113° F (45° C)

Frequency Response	100 Hz to 15 kHz

RECEIVER SPECIFICATIONS

Receiving System	Dual independent receivers, automatic-switching diversity

Image Rejection	55 dB nominal, 50 dB minimum

Signal-to-noise Ratio	>100 dB at 40 kHz deviation (A-weighted), maximum modulation 40 kHz

Total Harmonic Distortion	<=1% (10 kHz deviation at 1 kHz)

Sensitivity	20 dBµV (S/N 60 dB at 5 kHz deviation, IEC-weighted)

Audio Output	Unbalanced: 25 mV (at 1 kHz, ±5 kHz deviation, 100k ohm load) Balanced: 12.5 mV (at 1 kHz, ±5 kHz deviation, 100k ohm load)

Output Connectors	Unbalanced: 1/4" TS ("mono") phone jack Balanced: XLRM-type

Dimensions	8.27" (210.0 mm) W x 1.73" (44.0 mm) H x 6.39" (162.2 mm) D

Weight	2.2 lbs (1.0 kg)

Accessories Included	Two flexible UHF antennas, rack-mount adapters, AC adapter

BODY-PACK TRANSMITTER SPECIFICATIONS

RF Power Output	10 mW

Spurious Emissions	According to National Regulations

Batteries	Two 1.5V AA alkaline (not included)

Current Consumption	150 mA typical

Battery Life	Approximately 9 hours (depending on battery type and use pattern)

Dimensions	2.60" (66.0 mm) W x 3.63" (92.3 mm) H x 0.89" (22.5 mm) D

Net Weight	2.8 oz (80 grams)

HANDHELD TRANSMITTER SPECIFICATIONS

RF Power Output	10 mW

Spurious Emissions	According to National Regulations

Microphone Element	Dynamic cardioid

Batteries	Two 1.5V AA alkaline (not included)

Current Consumption	150 mA typical

Battery Life	Approximately 9 hours (depending on battery type and use pattern)

Dimensions	9.02" (229.0 mm) long x 2.11" (53.5 mm) maximum diameter

Net Weight	7.8 oz (221 g)

Accessory Included	AT8456a Quiet-Flex™ Stand Clamp

3000A Series
Frequency-agile True Diversity UHF Wireless Systems

For the wireless user ready to step up to an advanced UHF system, the 3000A Series is the solution. Offered in two UHF frequency bands, the 3000A Series features Audio-Technica's Digital Tone Lock Squelch plus an easy-to-read LCD information display in each unit which provides convenient visual indications of settings and operation status. The new frequency-scan function enables automatic assignment of clear open channels. The new ATW-R3100 receiver benefits from a newly designed high-specification front-end filtering system along with the latest Audio-Technica 1/2-wave antenna technology to maximise both simultaneous frequency use and range. Other features include 200-channel UHF True Diversity frequency-agile operation, soft-touch controls on all components, and step-through menus for setting preferences.

Automatic frequency scanning for easy set-up
200 PLL-synthesized channels per band selectable via soft-touch controls on receiver and transmitter
Available in two frequency bands:
840.125 - 864.875 MHz (F Band).
795.500 - 820.000 MHz (E Band)
True Diversity operation selects the better signal from two independent receiver sections, reducing dropouts
Interference-resistant UHF band operation
Advanced digital ToneLock™ squelch
Red alert light that warns of low battery power, signal loss and input overload
Transmitter battery-life fuel gauge on the receiver
Ground-lift switch
Balanced and unbalanced audio output jacks
Two receivers can be mounted side-by-side in a single 19" rack space
ATW-T310 UniPak® transmitter includes Super Hi-Z input that provides optimum load for guitar pickups
ATW-T341 handheld microphone/transmitter features the Artist Elite® AE4100 cardioid dynamic element
ATW-T371 handheld microphone/transmitter features the Artist Series ATM710 cardioid condenser element

200 Series
VHF Handheld and Body-pack Systems

Audio-Technica’s 200 Series Wireless System provides proven performance in a variety of settings. Each 200 Series professional VHF wireless system includes a receiver and either a body-pack transmitter or a handheld microphone/transmitter on a specific crystal-controlled frequency.

Non-diversity single-channel dual antenna system
Available in three travelling frequencies
Adjustable squelch control

SYSTEM CONFIGURATIONS

	200 Series Guitar R250 receiver and T201 transmitter with AT8319 Hi-Z instrument/guitar cable with 1/4" phone plug

	200 Series Presenter R250 receiver & T201 transmitter with AT829cW miniature cardioid condenser lavalier microphone. Includes clothing clip & windscreen

	200 Series Active R250 receiver and T201 transmitter with PRO8HEcW

	200 Series Options R250 receiver and T201 transmitter. No microphone.

	200 Series Vocal R250 receiver and T202 handheld transmitter

OVERALL SYSTEM SPECIFICATIONS

Operating Frequency	VHF high band, 173.800 MHz, 174.600 MHz and 175.000 MHz

Number of Channels	Fixed channel

Frequency Stability	±0.005%

Modulation Mode	FM

Maximum Deviation	±15 kHz

Operating Range	70m typical

Operating Temperature Range	40° F (4° C) to 110° F (43° C)

Frequency Response	80 Hz to 13 kHz

RECEIVER SPECIFICATIONS

Receiving System	Non-diversity, single-channel, dual antenna system

Image Rejection	50 dB minimum

Signal-to-noise Ratio	80 dB at 10 kHz deviation (IEC-weighted), maximum modulation 15 kHz

Total Harmonic Distortion	<=1% (10 kHz deviation at 1 kHz)

Sensitivity	20 dBµV for 60 dB S/N (IEC-weighted)

Audio Output	350 mV (1 kHz modulation, 10 kHz deviation, 100 k ohm load)

Output Connector	1/4" TS ("mono") phone jack

Power Supply	230V AC (50Hz) to 12V DC, 500 mA (centre positive), external

Dimensions	190.0 mm W x 42.0 mm H x 130.0 mm D

Net Weight	311 grams

Accessories Included	Power Supply

BODY-PACK TRANSMITTER SPECIFICATIONS

RF Power Output	10 mW High position, 2 mW Low position, typical

Spurious Emissions	According to R&TTE Directive

Dynamic Range	>=90 dB, A-weighted

Input Connections	High impedance, low impedance, bias

Battery	9V battery (NEDA type 1604) alkaline, not included

Current Consumption	30 mA typical

Battery Life	Approximately 15 hours (high), 20 hours (low);

Dimensions	65.0mm W x 110.0 mm H x 25.4 mm D

Net Weight	78 grams (without battery)

HANDHELD TRANSMITTER SPECIFICATIONS

RF Power Output	10 mW typical (high); 2 mW (low), typical

Spurious Emissions	According to R&TTE Directive

Dynamic Range	>=90 dB, A-weighted

Microphone Element	Dynamic unidirectional

Battery	9V (NEDA type 1604) alkaline, not included

Current Consumption	30 mA typical

Battery Life	Approximately 15 hours (high); 20 hours (low)

Dimensions	241.3 mm long; 53.3 mm diameter

Net Weight	360 grams

Accessory Included	AT8456a Quiet-Flex stand clamp

840.125 - 864.875 MHz (F Band). For use in the UK
795.500 - 820.000 MHz (E Band) For use in the rest of Europe

BACK

MVS HOME PAGE

OVERALL SYSTEM SPECIFICATIONS

RECEIVER SPECIFICATIONS

BODY-PACK TRANSMITTER SPECIFICATIONS

PLUG-ON TRANSMITTER SPECIFICATIONS

OVERALL SYSTEM SPECIFICATIONS

RECEIVER SPECIFICATIONS

BODY-PACK TRANSMITTER SPECIFICATIONS

HANDHELD TRANSMITTER SPECIFICATIONS

OVERALL SYSTEM SPECIFICATIONS

RECEIVER SPECIFICATIONS

BODY-PACK TRANSMITTER SPECIFICATIONS

HANDHELD TRANSMITTER SPECIFICATIONS